Nossas Publicações

Desde 2018, publicamos 150 artigos científicos em revistas de seletiva política editorial com Fator de Impacto de 4 a 5 com 1391 citações.

Explore os artigos, capítulos de livros e trabalhos apresentados em congressos pelos membros do nosso laboratório.

2026Patente

BR1020260112682 - PROCESSO DE MANUFATURA ESCALONÁVEL DE CÉLULAS A COMBUSTÍVEL DE ÓXIDO SÓLIDO (SOFC) SUPORTADAS POR ÂNODO COMPÓSITO E CÉLULA A COMBUSTÍVEL DE ÓXIDO SÓLIDO (SOFC) MULTICAMADA

Autores: de Oliveira, J.P.J.; ANTUNES, F. C. ; ZANIN, HUDSON ; DOUBEK, GUSTAVO ; DIAS, T. ; BRASIL, G. B. ; NORMANDIA, VICTOR C. ; SILVA, B. P. ; BARBOSA, J. B. S. ; DANTAS, D. A. ; DUARTE, G. A. ; HUNT, JULIAN

INPI

2026Artigo Científico

Comprehensive analysis of the state of charge and health of Na3V2(PO4)3 cathodes for sodium-ion batteries

Autores: Garcia, N.G.; Real, Carla G.; dos Santos, João Pedro Aguiar; Gonçalves, Josué M.; Nunes, Willian; Da Silva, Leonardo Morais; Zanin, Hudson

Journal of Energy Storage

Nossas Publicações

BR1020260112682 - PROCESSO DE MANUFATURA ESCALONÁVEL DE CÉLULAS A COMBUSTÍVEL DE ÓXIDO SÓLIDO (SOFC) SUPORTADAS POR ÂNODO COMPÓSITO E CÉLULA A COMBUSTÍVEL DE ÓXIDO SÓLIDO (SOFC) MULTICAMADA

Comprehensive analysis of the state of charge and health of Na3V2(PO4)3 cathodes for sodium-ion batteries

Cost-effective spray and spin coating of YSZ electrolyte slurries on aqueous-based anode tape casting for intermediate temperature solid oxide fuel cells

Effects of the La0.7Sr0.3MnO3 and 8 mol% yttria-stabilized zirconia phases on the conductivity and stability of composite cathodes

Enhancing charge storage in melanin via sulfur functionalization for supercapacitors applications

From low- to high-entropy layered transition metal oxide cathodes: recent progress on spray-drying technologies in materials design for sodium-ion batteries

Fundamental Investigation of Lithium–Sulfur Battery Cathodes with Controlled Sulfur Content in Activated Carbon by Electrochemical Techniques

Fundamental Investigation of Lithium–Sulfur Battery Cathodes with Controlled Sulfur Content in Activated Carbon by Electrochemical Techniques

Influence of processing parameters on the electrical conductivity of 8YSZ electrolytes fabricated via tape casting

Surface chemical heterogeneity governing sodium storage in hard carbon anodes

Surface chemical heterogeneity governing sodium storage in hard carbon anodes

Tailoring electrolyte solvation for improved Na-based supercapacitor efficiency: an operando characterization approach

A Brief Review of H2S and Nitrogen-Based Contaminants from Biogas: Effects on Reforming Catalysts and SOFC Anodes

A Methodology for the Feasibility Assessment of Using Crop Residues for Electricity Production Through GIS-MCD and Its Application in a Case Study

A Novel Methodology for Assessing the Electricity Generation Potential of Biomass Residues: A Case Study in the State of Minas Gerais, Brazil

Boosting ionic conductivity of Y2O3 co-doped ZrO2 – CeO2 electrolyte of SOFCs by successive thermal-treatments

BR102025028232-1 - PROCESSO DE PREPARAÇÃO DE ELETRÓLITOS MODIFICADOS COM LÍQUIDO IÔNICO, ELETRÓLITOS OBTIDOS E USO

Emerging multimetal LMFP-based cathodes for lithium-ion batteries: a review

Engineering Lamellar Stainless Steel 410S Porous Supports via a Water-Based Tape Casting Method: A Scalable Path for MS-SOFCs

Facile and controlled deposition of MOF-derived CoNi-LDH on NiCo2O4 for core–shell architectures in advanced energy storage devices

From Low- to High-Entropy PBAs and Their Derivatives for Lithium–Sulfur Batteries

High performance of supercapacitors containing an ionic liquid electrolyte by means of electrochemical and computational studies

Medium- and high-entropy catalysts for hydrogen production from strategic renewable fuel reforming: A review

Porous metal substrates for solid oxide fuel cells: Manufacturing techniques and future perspectives

Radical and Environmentally Friendly Route to Poly(fullerene)s Incorporating C60, C70, and PCBM

Reviewing metal supported solid oxide fuel cells for efficient electricity generation with biofuels for mobility

Silicon Carbide-Based Anodes for Lithium-Ion Batteries: A Green View

Technical and economic potential for hydrogen production from biomass residue gasification in the state of Minas Gerais in Brazil

Ultrathin tantalum films for Schottky contacts on 4H silicon carbide

Advanced in situ/operando characterizations of lithium-sulfur batteries: A sine qua non

Analysis of thin Film Deposition and Defects Influence on Quinoline Derivative-Titanium Dioxide Heterostructure for Potential p-n Junction in Optoelectronic Devices

Biogas Refining: A Review on Advances in Metal-Oxide-Modified Activated Carbon for H <sub>2</sub> S and CO <sub>2</sub> Removal

Biogas Refining: A Review on Advances in Metal-Oxide-Modified Activated Carbon for H<sub>2</sub>S and CO<sub>2</sub> Removal

BR 10 2023 012213-2 - ELETRÓLITOS NÃO INFLAMÁVEIS COM ADITIVO DE FLUOROPOLÍMERO E SEU USO

BR1020240119851 - PROCESSO PARA PRODUÇÃO DE SUPORTES METÁLICOS POROSOS, SUPORTES METÁLICOS POROSOS E SEUS USOS

BR102024023966-0 - ELETRÓLITO MODIFICADO, DISPOSITIVOS ELETROQUÍMICOS E USOS RELACIONADOS

Development of new cathode materials for all-iron redox flow batteries using hard carbon-based composites containing niobium pentoxide

Electrochemical behavior of non‐functionalized and sulfonated melanins at different <scp>pH</scp> values

Electrochemical Doping Effect on the Conductivity of Melanin-Inspired Materials

Enhanced cyclability and energy density of mid-nickel layered oxide cathode material LiNi0.55Mn0.25Co0.20O2 by niobium doping via solvothermal method

Exploring the chemistry and composition of black soldier fly eumelanin, a material for a circular economy

Interface passivation with Ti3C2Tx-MXene doped PMMA film for highly efficient and stable inverted perovskite solar cells

Medium- and high-entropy materials as positive electrodes for sodium-ion batteries: Quo Vadis?

Operando FTIR study on water additive in lithium-sulfur batteries to mitigate shuttle effect

Properties of Thin Film Composites of rGO–SnO <sub>2</sub> and Modeling of Ultraviolet Laser‐Induced Conductivity Decay

Should we still be using HCl in the synthesis of SBA-15 and Al-SBA-15?

Super Ni-rich and Co-poor LiNixCoyMn1-x-yO2, LiNixCoyAl1-x-yO2, and LiNixCoyMnzAl1-x-y-zO2 (x ≥ 0.85) based cathodes for lithium-ion batteries: A review on emerging trends, recent developments, and future perspectives

Tailoring interlayer spacing of Ti3C2Tx MXene with organic acid doped polyaniline and polypyrrole for more stable supercapacitors

The Impact of the Ratio Between Stronger and Weaker Acid Sites on the Production of 5‐Hydroxymethylfurfural and Furfural from Monosaccharides

Thin film deposition of organic-inorganic quinoline-tin dioxide p-n junction for optoelectronic devices

Trends in ionic liquids and quasi-solid-state electrolytes for Li-S batteries: A review on recent progress and future perspectives

Understanding intra-pore electrolyte resistances and distributed capacitances in carbon electrodes used in supercapacitors using a robust modeling process to separate the charge-storage occurring into macro-, meso-, and micro-pore structures

A sulfur host based on silicon oxycarbide for advanced lithium‑sulfur batteries

An approach to technology selection in bioelectricity technical potential assessment: A Brazilian case study

BR1020230155553 - PROCESSO PARA PRODUÇÃO DE FILMES FINOS DE ÓXIDOS PARA CÉLULAS DE ÓXIDO SÓLIDO (SOC) E SEU USO

Combining electrochemical, molecular simulation and operando techniques to investigate the stability of electrodes and organic electrolytes used in EDLCs

Combining in situ electrochemistry, operando FTIR and post-mortem analyses to understand Co-Mn-Al spinels on mitigating shuttle effect in lithium-sulfur battery

Dissipative effects in nonideal supercapacitors and batteries

Effects of organic additives on film characteristics of flexible PEDOT:PSS/latex

Electron transport bilayer with cascade energy alignment based on Nb2O5–Ti3C2Tx MXene/TiO<sub>2</sub> for efficient perovskite solar cells

Holistic assessment of Brazil's bioenergetic potential

Melanin/PEDOT:PSS blend as organic mixed ionic electronic conductor (OMIEC) for sustainable electronics

On the electrochemical properties of lithium‑sulfur batteries

Reviewing perovskite oxide sites influence on electrocatalytic reactions for high energy density devices

Supercapacitor auto analyser: An automated data analysis software for supercapacitor characterization

Use of cobalt ferrite and activated carbon in supercapacitors

Boosting energy-storage capability in carbon-based supercapacitors using low-temperature water-in-salt electrolytes

Deposition of hybrid structures of reduced graphene oxide and tin dioxide thin films, and persistent photoconductivity observation

How Would Solid Oxide Fuel Cells and Bioethanol Impact in Electric Mobility Transition?

In-situ electrochemical and operando Raman techniques to investigate the effect of porosity in different carbon electrodes in organic electrolyte supercapacitors

Recent advances on quasi-solid-state electrolytes for supercapacitors

Zirconium oxide film deposition properties to build transparent electronic devices in conjunction with tin dioxide

Anomalous diode behavior of Cu2S/SnO2 p–n junction

Enhancement of surface properties of sol gel tin dioxide thin films with addition of surfactant in the precursor solution

Enhancement of surface properties of sol gel tin dioxide thin films with addition of surfactant in the precursor solution

Evaluation of the maturity level of biomass electricity generation technologies using the technology readiness level criteria

New Insights on the Sodium Water-in-Salt Electrolyte and Carbon Electrode Interface from Electrochemistry and Operando Raman Studies

Ragone Plots for Electrochemical Double‐Layer Capacitors

Synthesis and Characterization of Cu2-xS structures by Different Chemical Routes for Electronic Applications